Page 1020 - A.J. Kitchen & Service

Fagor Professional Dishwashing

Flight type dishwashers

Interface

· Electromechanical switch that allows you to choose The conveyor carriage locking and activation push
between 3 programmes depending on the workload or buttons are also on the loading and unloading areas.
dirt. - Emergency push buttons at the entrance and exit
- Two digital displays for the control and visualisation of included.
washing and rinsing temperatures. - Main switch included.
- Unlock push button to reverse the conveyor carriage to
help clear the jam and another push button to activate it.

Common features Useful height Unloading area

of the range

- Wash modules without inner piping. - Washing tanks:
- Double-skin construction. · 100-litre tank.
- Double-skin doors with thermal and acoustic insulation. · Washing system consisting of 6 upper arms and 5 lower
- Counterweighted doors with safety stops allow full arms.
unrestricted access to the pre-wash, wash, pre-rinse and - Stainless steel arms in the pre-wash and wash, removable
rinse areas. for cleaning.
- Modular construction allowing the machine to be divided - Triple level filtration in the wash and pre-wash modules.
on site into narrower modules. - The bottom of the tank is stamped to ensure complete
- Loading area of 763 mm and unloading area of 830 mm draining and facilitate cleaning.
useful lenght at 900 mm height. - Thermally insulated boilers.
- 150 mm splash (AS) guard module at the loading area. - Easily removable stainless steel rinsing arms with high
- Activation of the washing process by photocell. efficiency rinsing nozzles.
- Belt drive speed controlled by a frequency converter and - Adjustable steam suction system that prevents vapours
a micro cut-off which, in the event of any kind of blockage, from escaping.
stops the machine without causing any damage to it. It - Energy recovery included, located on the upper part of the
has an unblocking feature that reverses the belt to help machine, which allows the installed power to be reduced Available belts
clear the jam. by 9kW.
- Autotimer: after a period of inactivity, the traction motor is - Drying (D) placed on the unloading area and possibility of
deactivated, reducing power consumption. adding up to 2 additional dryers. Belt for plates and baskets Belt for kitchenware (pots and Belt for isothermal trays
- Power-saving mode (stand-by): Reduction of power - Curtains resistant to high temperatures and detergents, containers)
consumption and limescale deposition on the heating which are installed to prevent water splashing and
element by reducing the temperature of the boiler and tank contamination between modules.
water when the machine is not in operation. - Detection of belt end with stop and autostart.
- Automatic pre-heating system. Activation of the washing
pumps and the dryers prior to reaching the setpoint - Machine protected against water jets according to IPX5
temperatures to heat the environment and thus achieve a category.
quick start-up of the machine.

229 230